Adsorption of arsenic from water using activated neutralized red mud

In this paper activated seawater-neutralized red mud, herein referred to as activated Bauxsol (AB), is used as a novel adsorbent for removing inorganic arsenic (As) from water. The adsorption of As onto AB is studied as a function of contact time, particle size, pH, initial As concentration, AB dosage, and temperature. Kinetic data indicate that the process pseudoequilibrates in 3 and 6 h for As(V) (arsenate) and As(III) (arsenite), respectively, and follows a pseudo-first-order rate expression. Within the range tested, the optimal pH for As(V) adsorption is 4.5, and close to 100% removal can be achieved irrespective of the initial As(V) concentration. Desorption of As(V) is greatest at pH 11.6 where a maximum of 40% can be achieved. In contrast, the optimum pH for As(III) removal is 8.5, and the removal efficiency changes with the initial As(III) concentration. The adsorption data fit the Langmuir isotherm and its linearized form well, with thermodynamic data indicating the spontaneous and endothermic nature of the process. The FITEQL (V.4) and PHREEQC (V.2) computer programs are used to predict As(V) adsorption at various pH values (based on diffuse double layer models). The modeling results fit the experimental results very well and indicate that surface complexation modeling is useful in describing the complex AB surface during the adsorption process. This study shows that As(III) needs to be oxidized to As(V) for a favorable removal using AB and that AB can be a very efficient unconventional adsorbent for removing As(V) from water.