Related Experiment Video
Updated: Aug 24, 2026

Measurement of the Potential Rates of Dissimilatory Nitrate Reduction to Ammonium Based on 14NH4+/15NH4+ Analyses via Sequential Conversion to N2O
Published on: October 7, 2020
Automatic control of external carbon source addition for nitrogen removal in sewage with low C/N ratios
1Department of Environmental Engineering, Pusan National University, Busan, 609-735, Korea. hai@pusan.ac.kr
Abstract:
For cost-effective nitrogen removal from sewage with low C/N ratios, an automatic control system for the addition of external carbon based on oxidation-reduction potential (ORP) data in an anoxic reactor has been developed. In this study, it was carried out with a pilot-scale modified Bardenpho process. This consisted of anoxic1, aerobic1, anoxic2 and aerobic2 stages with an external recycle ratio of 150% (Q/Qinf), and a media packing ratio of 2.4%-2.9% (v/v) in the aerobic reactor. As a result of applying the automatic control system for the minimization of the external carbon source dosage, the dosage was decreased by about 20%. This estimate was based on ORP compared with a stable dosage of 75 mg/L based on the C/NOx-N ratio of the anoxic influent. It was necessary that the ORP set-value be regulated from -120 mV to -80 mV because influent NH4+-N concentration varied from 12 to 15 mg/L due to rainfall. Correspondingly, the demanded dosages were decreased. Drift of the the real-time value in control system was more stable after changing the ORP set-value from -120 mV to -80 mV.
Related Concept Videos
Microbial Wastewater Treatment
Inorganic Nitrogen Assimilation
Biological Treatment of Effluent and Waste Water
Overview of Nitrogen Metabolism
The largest pool of nitrogen available in the terrestrial ecosystem is gaseous nitrogen (N2) from the air, but this nitrogen...
2° Amines to N-Nitrosamines: Reaction with NaNO2

