Related Experiment Video
Updated: Aug 24, 2026

Optimize Flue Gas Settings to Promote Microalgae Growth in Photobioreactors via Computer Simulations
Published on: October 1, 2013
Development and demonstration of an explicit lumped-parameter biofilter model and design equation incorporating monod
Francis L Smith1, George A Sorial, Makram T Suidan
1Process Engineering Department, Kellogg Brown & Root, Inc., Houston, Texas, USA. lee.smith@halliburton.com
Abstract:
Biofiltration is an economical air pollution control (APC) technology, particularly suitable for the treatment of air-streams having high flow rates and low concentrations of volatile organic compounds (VOCs). This technology utilizes enzymatic catalysis at ambient conditions to mineralize such pollutants to CO2, H2O, and salts. A pilot-scale study conducted for more than 4 years investigated the development of a new biofiltration technology employing trickle bed air biofilters (TBABs). Following the completion of this experimental study, additional data analysis was performed to develop a simple lumped-parameter biofilter model, assuming first-order kinetics. This model related the observed biofilter performance to the principle independent physical, thermodynamic, and biochemical parameters. The initial model has subsequently been expanded to incorporate Monod kinetics. In this paper, the development and use of the final explicit lumped-parameter biofilter model and design equation, incorporating Monod kinetics, are presented. To facilitate the application of this model, practical procedures are also presented for the determination of VOC solubility, VOC biokinetic Monod parameters, and the maximum practical biofilter inlet VOC concentration.
Related Concept Videos
Bioreactor Design and Operational System
Bioreactor Controls-II
Typical Model Studies
Design Example: Creating a Hydraulic Model of a Dam Spillway
Biological Treatment of Effluent and Waste Water
One-Compartment Open Model: Wagner-Nelson and Loo Riegelman Method for ka Estimation
On...

