Related Experiment Video
Updated: Aug 23, 2026

An Automated System for Sound Localization Testing in Hearing-Impaired Listeners
Published on: March 13, 2026
Relative benefits of linear analogue and advanced digital hearing aids
1Hearing and Balance Centre, ISVR, University of Southampton, Southampton, UK. sallyw@ihr.mc.ac.uk
Abstract:
Speech recognition performance and self-reported benefit from linear analogue and advanced (digital) hearing aids were compared in 100 first-time hearing aid users with mild-to-moderate sensorineural hearing loss fitted monaurally with a behind-the-ear (BTE) hearing aid in a single-blind randomized crossover trial. Subjects used each aid for 5 weeks in turn, with aid order balanced across subjects. Three alternative models of digital hearing aid were assigned to subjects according to a balanced design. Aid type was disguised to keep subjects blind within practical limitations. Aided speech recognition performance in noise was measured at speech levels of 65 and 75dB at a speech-to-noise ratio (SNR) of +2dB for closed sets of single words. Self-rated benefit was measured using the Abbreviated Profile of Hearing Aid Benefit (APHAB) and the Glasgow Hearing Aid Benefit Profile (GHABP). Quality of life, hearing aid use and user preferences were also assessed. Speech recognition scores with the digital aids were significantly better at 75dB than with the analogue aids Self-reported benefit (APHAB, GHABP) and improvement in quality of life were generally not significantly different between analogue and digital aids, although aversiveness measured with the APHAB was significantly lower with digital aids, and satisfaction measured with the GHABP was greater. The digital aids were preferred significantly more often than the analogue aids, with 61 subjects choosing their digital aid, 26 choosing the analogue aid, and nine being equivocal. Overall, this study shows advantages for advanced digital over simple linear analogue aids in terms of both objective and subjective outcomes, although average differences are not large.
Related Concept Videos
Sum and Difference OpAmps
A summing amplifier, or an adder, utilizes an op-amp to merge multiple input signals into a single output signal. When audio signals are introduced into its input channels, the input resistors initiate currents that traverse feedback resistors, resulting in an output voltage. Applying Kirchhoff's current...
Design Example: Vintage Mixing Console
The specifications for the pre-amplifier were clear. It needed to amplify the audio signal by a factor of 10, have an input impedance above 10...
Characteristics of Practical Op Amps
The ratio of differential gain to the common-mode gain is defined as the common-mode rejection ratio (CMRR). This ratio quantifies the ability of operational amplifiers (op-amps) to reject common-mode...
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
Characteristics of OpAmp
Design Example
