Related Experiment Video
Updated: Aug 11, 2026

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae
Published on: July 10, 2015
Determination of cadmium and lead in vegetables by stripping chronopotentiometry
F Lo Coco1, P Monotti, V Novelli
1Department of Economic Sciences, University of Udine, Via Tomadini 30/A, I-33100, Italy. filippo.lococo@uniud.it
Abstract:
A method for the determination of cadmium and lead in vegetables by stripping chronopotentiometric analysis, after digestion of the sample with concentrated sulphuric acid and dry-ashing, is described. Metal ions were concentrated as their amalgams on a glassy carbon-working electrode previously coated with a thin mercury film and then stripped by a suitable oxidant. Potential and time data were digitally derived and E was plotted versus dt/dE(-1), thus increasing both the sensitivity of the method and the resolution of the analysis. Quantitative analysis was carried out by the method of standard addition; good linearity was obtained in the range of examined concentrations, as was shown by the determination coefficients, which were 0.998 (n = 4) for cadmium and 0.993 (n = 4) for lead. Recoveries of 85-100% for cadmium and of 84-97% for lead were obtained from a sample spiked at different levels. Accuracy was demonstrated by analysis of a matching reference sample of cabbage. The detection limits were 1.8 ng g(-1) of wet mass for cadmium and 5.1 ng g(-1) of wet mass for lead. The relative standard deviations (mean of nine determinations), evaluated on a real sample, were 6.7 and 6.2%, respectively. Results obtained on 10 different commercial samples of pepper (Capsicum annuum), and egg plant (Solanum melongena) were not significantly different from those obtained by graphite furnace atomic absorption spectrophotometry technique. The average content was in the range 3.1-18.6 ng g(-1) for cadmium and 38.2-64.3 ng g(-1) for lead.
More Related Videos
09:13Hydroponics: A Versatile System to Study Nutrient Allocation and Plant Responses to Nutrient Availability and Exposure to Toxic Elements
Published on: July 13, 2016
12:03Two-Dimensional Visualization and Quantification of Labile, Inorganic Plant Nutrients and Contaminants in Soil
Published on: September 1, 2020
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Extraction: Advanced Methods