Fenton oxidation of Reactive Black 5: effect of mixing intensity and reagent addition strategy
Related Experiment Video
Updated: Aug 9, 2026

Reductive Electropolymerization of a Vinyl-containing Poly-pyridyl Complex on Glassy Carbon and Fluorine-doped Tin Oxide Electrodes
Published on: January 30, 2015
1Department of Chemical Engineering, UMIST, PO Box 88, M60 1QD United Kingdom.
Abstract:
This study investigates the effect of mixing intensity and reagents addition strategy on Fenton's reagent degrading a common reactive diazo type dyestuff, Reactive Black 5. Within the experimental conditions used in the study, the effect of mixing intensity on TOC removal was observed to be both significant and complex. Using factorial analysis, it was found that if the reagents are added near to each other, higher mixing intensity will enhance the effectiveness of the degradation process. However, a very, high mixing level may cause reduction in performance. It was also observed that the mixing intensity effect interacts with Fe2+ or/and H2O2 dosage. The benefit of increasing mixing intensity appears to be higher for lower reagents dosage. The effect of reagents addition strategy was found to be inter-dependent with mixing intensity level. It was also deduced that proper chemical addition strategy could be used to reduce the mixing intensity requirement of the process.
Related Concept Videos
Oxidation of Alkenes: Syn Dihydroxylation with Potassium Permanganate
Oxidation of Alcohols
The process of oxidation in a chemical reaction is observed in any of the three forms:
Oxidations of Aldehydes and Ketones to Carboxylic Acids
Aldehydes readily undergo oxidation in strong oxidizing agents such as potassium permanganate and chromic acid. The oxidation can also be carried out using mild oxidizing agents such as silver oxide. In fact, aldehydes can be easily oxidized...
Radical Oxidation of Allylic and Benzylic Alcohols
Redox Titration: Other Oxidizing and Reducing Agents
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
![Solid-phase Synthesis of [4.4] Spirocyclic Oximes](/_next/image?url=https%3A%2F%2Fcloudfront.jove.com%2FCDNSource%2Fteasers%2F58508.jpg&w=3840&q=50)
