Related Experiment Video
Updated: Aug 23, 2026

Evaluating the Effect of Roadside Parking on a Dual-Direction Urban Street
Published on: January 20, 2023
Effect of adaptive cruise control systems on traffic flow
1Physics Department, University of Michigan, Ann Arbor, 48109, USA. ldavis7@peoplepc.com
Abstract:
The flow of traffic composed of vehicles that are equipped with adaptive cruise control (ACC) is studied using simulations. The ACC vehicles are modeled by a linear dynamical equation that has string stability. In platoons of all ACC vehicles, perturbations due to changes in the lead vehicle's velocity do not cause jams. Simulations of merging flows near an onramp show that if the total incoming rate does not exceed the capacity of the single outgoing lane, free flow is maintained. With larger incoming flows, a state closely related to the synchronized flow phase found in manually driven vehicular traffic has been observed. This state, however, should not be considered congested because the flow is maximal for the density. Traffic composed of random sequences of ACC vehicles and manual vehicles has also been studied. At high speeds (approximately 30 m/s ) jamming occurs for concentrations of ACC vehicles of 10% or less. At 20% no jams are formed. The formation of jams is sensitive to the sequence of vehicles (ACC or manual). At lower speeds (approximately 15 m/s ), no critical concentration for complete jam suppression is found. Rather, the average velocity in the pseudojam region increases with increasing ACC concentration. Mixing 50% ACC vehicles randomly with manually driven vehicles on the primary lane in onramp simulations shows only modestly reduced travel times and larger flow rates.
Related Concept Videos
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller aligns...
Multi-input and Multi-variable systems
In the absence of...
Root-Locus Method
This system can be represented by a block diagram,...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control Systems
At the heart...
