Related Experiment Video
Updated: Aug 23, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Characterization and evaluation of potential reuse options for wastewater sludge and combined sewer system sediments
B Jiménez1, J M Méndez, J A Barrios
1Institute of Engineering, National University of Mexico (UNAM), Apartado Postal 70-472, Coyoacan 04510, Mexico, D. F. Mexico. BJimenezC@iingen.unam.mx
Abstract:
Combined sewer systems generate sediments that have characteristics similar to those of primary sludge. Mexico City has such a system composed of a network of pipes, regulation structures (dams, basins) and open channels. The annual generation of sediments is estimated at 2.8 Mm3, which includes 0.41 Mm3 of sludge. As a result, the total capacity for transporting water is reduced considerably, making it necessary to extract yearly an approximate 0.85 Mm3 of those materials and to send them to a final disposal site with a capacity that is being exhausted. As part of the local Governmental effort, this project evaluates the quality of sediments from 6 dams, 4 regulation basins, 2 open channels, and 3 transfer stations. Also, sludge from 20 wastewater treatment plants was sampled. The results showed an important presence of lead and hydrocarbons in some sediments, and some sludge samples contained arsenic and nickel above the limits. Moreover, microbial levels exceeded the limits in all the sediments and sludge samples. Erosion was linked to the generation of an important amount of sediments based on lead concentration. A classification was established to determine the degree of contamination of the sediments as well as the required treatment to allow their potential reuse.
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Microbial Wastewater Treatment
Environmental Applications of Microorganisms
Biofuels
Microbial Bioremediation of Hydrocarbons

