Mechanisms of biosorption of different heavy metals by brown marine macroalgae

The biosorption mechanisms of different heavy metallic cations (Cd, Ni, Pb) to active chemical groups on the cell wall matrix of the nonliving brown marine macroalga, Sargassum vulgaris in its natural form, were examined by the following instrumental and chemical techniques: Fourier-transform infrared (FTIR) analysis, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and extraction of alginic acid and sulfated polysaccharides, which act as metal-binding moieties present in cell wall. From the different techniques used and the known chemical composition of the algal cell wall, it was observed that biosorption of the metallic cations to the algal cell wall component was a surface process. The binding capacities of the different metal cations were between 1 and 1.2 mmol metal/g on a dry weight basis. The main chemical groups involved in the metallic cation biosorption were apparently carboxyl, amino, sulfhydryl, and sulfonate. These groups were part of the algal cell wall structural polymers, namely, polysaccharides (alginic acid, sulfated polysaccharides), proteins, and peptidoglycans. The main cadmium cation sequestration mechanism by the algal biomass was apparently chelation, while the nickel cation sequestration mechanism was mainly ion exchange. Lead cations exhibit higher affinity to the algal biomass, and their binding mechanism included a combination of ion exchange, chelation, and reduction reactions, accompanied by metallic lead precipitation on the cell wall matrix. During the ion exchange process, calcium, magnesium, hydrogen cations, and probably other cations (sodium and potassium) in the algal cell wall matrix were replaced by the tested heavy metals.