Related Experiment Video
Updated: Aug 23, 2026

Determination of the Settling Rate of Clay/Cyanobacterial Floccules
Published on: June 11, 2018
Flocculation and reflocculation of clay suspension by different polymer systems under turbulent conditions
1School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, 500 10th Street, NW, Atlanta, GA 30332-0620, USA.
Abstract:
The focused beam reflectance measurement (FBRM), also known as scanning laser microscopy (SLM), was used as a real-time monitor to study the flocculation and reflocculation of clay suspensions under different shear conditions in the presence of single polymer, dual polymer, microparticle and poly(ethylene oxide)/phenolformaldehyde (PEO/PFR) flocculation systems. For initial flocculation, the high molecular weight PEO and cationic polyacrylamide (CPAM) produced larger flocs than others. However, reflocculation of clay suspensions formed by these non- or low-charged polymers was insignificant after the initial flocs were broken under high shear force. In contrast, high charge density polymers, such as poly(diallyldimethylammonium chloride) (PDADMAC), do not form large initial flocs, but they showed significant reflocculation ability under a continuous shear condition. It is concluded that high flocculation can be obtained by effective polymer bridging, but high reflocculation can only be induced by high electrostatic attractive forces between suspended particles.
Related Concept Videos
The Colloidal State
Colloidal precipitates
Colloids
Coagulation
Colloids and Suspensions
Factors Affecting Dissolution: Polymorphism, Amorphism and Pseudopolymorphism
Some polymorphic crystals possess lower aqueous solubility than their amorphous counterparts, leading to incomplete absorption. For instance, the oral suspension of Chloramphenicol, which...

