Arterial mechanics in spontaneously hypertensive rats. Mechanical properties, hydraulic conductivity, and two-phase...

To characterize the interaction between mechanical and fluid transport properties in hypertension, we measured in vivo elastic material constants and hydraulic conductivity in intact segments of carotid arteries in normal and spontaneously hypertensive rats (SHR). With the use of a finite element model, the arterial wall was modeled as a large-deformation, two-phase (solid/fluid) medium, which accounts for the existence and motion of the tissue fluid. Measurements of internal diameter and transmural pressures were obtained during continuous increases in pressure from 0 to 200 mm Hg. Strain and stress components were calculated based on a pseudostrain exponential energy density function. To measure the hydraulic conductivity, segments of the carotid artery were isolated, filled with a 4% oxygenated albumin-Tyrode's solution, and connected to a capillary tube. The movement of the meniscus of the capillary tube represented the fluid filtration across the artery. To study the influence of transmural pressure on hydraulic conductivity, measurement of fluid filtration across the arterial wall was obtained at transmural pressures of 50 and 100 mm Hg. The material constants in the SHR (n = 9) were higher (p less than 0.05 for all variables) than in normal rats (n = 10): c = 1,343 +/- 96 versus 1,158 +/- 65 mm Hg, b1 = 1.84 +/- 0.24 versus 1.22 +/- 0.22, b2 = 0.769 +/- 0.114 versus 0.616 +/- 0.11, b3 = 0.017 +/- 0.005 versus 0.0065 +/- 0.002, b4 = 0.206 +/- 0.04 versus 0.083 +/- 0.03, b5 = 0.0594 +/- 0.007 versus 0.0217 +/- 0.006, and b6 = 0.22 +/- 0.09 versus 0.123 +/- 0.02, respectively. The hydraulic conductivity of the total wall, calculated from the filtration data, was lower (p less than 0.05) at both 50 and 100 mm Hg in the SHR (n = 6) compared with normal rats (n = 7): 1.12 +/- 0.31 x 10(-8) and 0.72 +/- 0.23 x 10(-8) versus 1.95 +/- 0.53 x 10(-8) and 1.35 +/- 0.47 x 10(-8) cm/(sec.mm Hg), respectively. The intergroup comparisons between 50 and 100 mm Hg in both SHR and normal rats were also different (p less than 0.05). The finite element model was used to predict tissue fluid pressure distribution, tissue fluid velocity distribution, and total Cauchy stress gradients developed in the arterial wall during fluid pressurization in both species.(ABSTRACT TRUNCATED AT 400 WORDS)