Related Experiment Video
Updated: Aug 22, 2026

Physical, Chemical and Biological Characterization of Six Biochars Produced for the Remediation of Contaminated Sites
Published on: November 28, 2014
Assessment of the availability of polycyclic aromatic hydrocarbons from gasworks soil using different extraction
Magnus Bergknut1, Anna Kitti, Staffan Lundstedt
1Environmental Chemistry, Department of Chemistry, Umeå University, SE-901 87 Umeå, Sweden. magnus.bergknut@chem.umu.se
Abstract:
This study was designed to assess the availability of polycyclic aromatic hydrocarbons (PAHs) present at a gasworks site to different soil remediation techniques. The study examined the effect on PAH availability of using different organic solvents, the degree of pretreatment, and the extraction time. In total, 25 PAHs (with two to six fused rings) and five carbonyl derivatives were measured. The results indicated that the PAHs and their derivatives were bound loosely to the surface of the studied soil and that there were no significant kinetic boundaries associated with the extraction of the PAHs. Furthermore, it was concluded that the studied soil was not suitable for bioremediation, as the concentration of PAHs with low molecular weight were limited. However, pressurized liquid extraction (PLE) with methanol as the solvent extracted 97% of all PAHs and PAH-derivatives, indicating that extraction may be effective as part of a soil remediation technique for old gasworks soils.
More Related Videos
07:06Investigating Long-Distance Transport of Perfluoroalkyl Acids in Wheat via a Split-Root Exposure Technique
Published on: September 28, 2022
08:12Characterization, Quantification and Compound-specific Isotopic Analysis of Pyrogenic Carbon Using Benzene Polycarboxylic Acids (BPCA)
Published on: May 16, 2016
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Sample Preparation for Analysis: Overview
Bulk or large solid samples are typically reduced in size using grinding, crushing, or milling techniques to increase the...