Related Experiment Video
Updated: Aug 11, 2026

Controlled-release of Chlorine Dioxide in a Perforated Packaging System to Extend the Storage Life and Improve the Safety of Grape Tomatoes
Published on: April 7, 2017
Use of electron beam irradiation for mold decontamination on cheddar cheese
G Blank1, K Shamsuzzaman, S Sohal
1Department of Food Science, University of Manitoba, Winnipeg, Canada.
Abstract:
Cheddar cheese slices, surface-inoculated with either Penicillium cyclopium or Aspergillus ochraceus spores, were vacuum packaged and irradiated using an electron beam accelerator. Following treatment at .21 and .52 kGy, the shelf-life of cheese containing P. cyclopium was extended by 3 and 5.5 d, respectively, in comparison with inoculated, untreated samples. Under similar treatment and storage conditions, cheese containing A. ochraceus exhibited average shelf-life extensions of 42.5 and 52.2 d, respectively. Increasing the postirradiation storage temperature to 15 degrees C reduced the shelf-life of cheese, especially with samples containing A. ochraceus. The lowest dose required to inactivate ca. 50 to 60 spores/cm2 of either A. ochraceus or P. cyclopium on the surface of cheese was ca. .42 and .95 kGy, respectively. Irradiation survival curves of A. ochraceus and P. cyclopium spores in cheese yielded average values (the dose required to reduce initial population by 90%) of .21 and .42 kGy, respectively.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Physical Methods for Controlling Microbial Growth: Temperature
Physical Methods for Controlling Microbial Growth: Radiation and Filtration

