Related Experiment Video
Updated: Aug 21, 2026

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages
Published on: April 13, 2016
New x-ray tube performance in computed tomography by introducing the rotating envelope tube technology
Peter Schardt1, Josef Deuringer, Jörg Freudenberger
1Siemens Medical Solutions, Vacuum Technology, Erlangen, Germany. peter.schardt@siemens.com
Abstract:
The future demands of computed tomography imaging regarding the x-ray source can be summarized with higher scan power, shorter rotation times, shorter cool down times and smaller focal spots. We report on a new tube technology satisfying all these demands by making use of a novel cooling principle on one hand and of a novel beam control system on the other hand. Nowadays tubes use a rotating anode disk mainly cooled via radiation. The Straton x-ray tube is the first tube available for clinical routine utilizing convective cooling exclusively. It is demonstrated that this cooling principle makes large heat storage capacities of the anode disk obsolete. The unprecedented cooling rate of 4.8 MHU/min eliminates the need for waiting times due to anode cooling in clinical workflow. Moreover, an electronic beam deflection system for focal spot position and size control opens the door to advanced applications. The physical backgrounds are discussed and the technical realization is presented. From this discussion the superior suitability of this tube to withstand g-forces well above 20 g created by fast rotating gantries will become evident. Experience from a large clinical trial is reported and possible ways for future developments are discussed.
Related Concept Videos
Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...
X-ray Imaging
Imaging Studies I: CT and MRI
Description of the Procedures
Computed Tomography (CT) scan:
Computed Tomography (CT) scans use X-ray technology to generate detailed images of bones, organs, and tissues. During the scan, the patient lies on a moving table...
Electron Microscope Tomography and Single-particle Reconstruction
Electron Tomography
Electron tomography can be performed either in TEM or STEM (scanning transmission...
Transmission Electron Microscopy
Imaging Studies III: Computed Tomography