Related Experiment Video
Updated: Aug 1, 2026

Visually Mediated Odor Tracking During Flight in Drosophila
Published on: January 26, 2009
Fly motion vision is based on Reichardt detectors regardless of the signal-to-noise ratio
Abstract:
The computational structure of an optimal motion detector was proposed to depend on the signal-to-noise ratio (SNR) of the stimulus: At low SNR, the optimal motion detector should be a correlation or "Reichardt" type, whereas at high SNR, the detector would employ a gradient scheme [Potters, M. & Bialek, W. (1994) J. Physiol. (Paris) 4, 1755-1775]. Although a large body of experiments supports the Reichardt detector as the processing scheme leading to direction selectivity in fly motion vision, in most of these studies the SNR was rather low. We therefore reinvestigated the question over a much larger SNR range. Using 2-photon microscopy, we found that local dendritic [Ca(2+)] modulations, which are characteristic of Reichardt detectors, occur in response to drifting gratings over a wide range of luminance levels and contrasts. We also explored, as another fingerprint of Reichardt detectors, the dependence of the velocity optimum on the pattern wavelength. Again, we found Reichardt-typical behavior throughout the whole luminance and contrast range tested. Our results, therefore, provide strong evidence that only a single elementary processing scheme is used in fly motion vision.
Related Concept Videos
Light Acquisition
Difference from Background: Limit of Detection
The LOD indicates the presence or absence...
Absolute Motion Analysis- General Plane Motion
As the drone's propellers rotate, an upward force is generated that counteracts the force of gravity, enabling the drone to lift off from the ground. This initial movement of the drone is along a straight path, representing a form of translational motion. In this phase, every point on the drone...
Relative Motion Analysis - Velocity
When an external force is exerted, it sets the crank into a rotational movement. This, in turn, instigates the motion of the connecting rod, leading to what is referred to as a general plane motion. This process involves two key points - point A on the connecting rod...
Relative Motion Analysis using Rotating Axes
However, to express the relative position of point B relative to point A, an additional frame of reference, denoted as x'y', is necessary. This additional frame not only translates but also rotates relative to the fixed frame, making it instrumental in...

