Photon beam quality specification by narrow-beam transmission measurements

Radiation quality specifications in megavoltage photon beams are usually based on depth-dose measurements performed under reference conditions. Stopping-power ratios and various correction factors are then related to parameters such as TPR(10)20, which are extracted from depth-dose measurements. Stopping-power ratio determinations based on this concept were shown to be in error by more than 2% at high energies. Furthermore, electrons generated in the treatment head can, at high energies, contribute to the dose at a depth of 10 cm and thus significantly affect the TPR(10)20 ratio. This method was further shown to be inadequate when the dose in other parts of the field than the reference point was to be measured with ionization chamber dosimetry. A new standardized device for determining photon beam quality based on half value layer (HVL) measurements in water was developed and thoroughly investigated in both a low-energy, (4 MV) and a high-energy beam. A relation between HVL and stopping-power ratios water-to-air was determined by comparative measurements with air ionization chambers and liquid-filled ionization chambers together with Fricke dosimetry. Furthermore, different radiation quality gradients in the photon fields for different types of field-flattening systems, and field-compensating methods were discussed.