Related Experiment Video
Updated: Jul 16, 2026

Using Multiple Light Scattering to Examine the Stability of Phyllanthus emblica L. Extracts Obtained with Different Extraction Methods
Published on: April 14, 2023
Stability of polypeptide multilayers as studied by in situ ellipsometry: effects of drying and post-buildup changes
Tobias J Halthur1, Per M Claesson, Ulla M Elofsson
1YKI, Institute for Surface Chemistry, Box 5607, SE-114 86 Stockholm, Sweden. tobias.halthur@surfchem.kth.se
Abstract:
Polyelectrolyte multilayers (PEM) of poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) with an initial layer of polyethyleneimine (PEI) were built on silica and titanium surfaces using the layer-by-layer (LbL) technique. The stability of the film during drying/rewetting, temperature cycles, and pH shifts was studied in situ by means of ellipsometry. The film thickness was found to decrease significantly (approximately 70%) upon drying, but the original film thickness was regained upon rewetting, and the buildup could be continued. The thickness in the dry state was found to be extremely sensitive to ambient humidity, needing several hours to equilibrate. Changes in temperature and pH were also found to influence the multilayer thickness, leading to swelling and deswelling of as much as 8% and 10-20% respectively. The film does not necessarily regain its original thickness as the pH is shifted back, but instead shows clear signs of hysteresis.
More Related Videos
Related Concept Videos
pH
Precipitation Titration Curve: Analysis
Precipitation Titration: Endpoint Detection Methods
In the Volhard method, a standard excess of AgNO3 is first added to the...
Extraction: Effects of pH
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...

