Preconcentration and determination of priority pollutant phenols in waters at trace levels using a polymeric solid-phase extraction cartridge

A method to preconcentrate and analyse the EPA priority pollutant phenols from water samples is evaluated. Spe-ed Advanta cartridges, containing 100mg of a polymeric matrix modified with polar groups, are used in the extraction and enrichment step. Several parameters are studied in order to find the best experimental conditions to perform a solid-phase extraction process. Sample flow rate and pH appear as variables that could significantly affect the recoveries obtained. Water samples need a pH adjustment to values lower than 3 units and must be percolated through the cartridges with flow rates over 5 mL min(-1). The highest recoveries and preconcentrations are obtained using acetonitrile as the elution solvent. Sample volumes from 100 mL to 1 L with concentrations ranging from 50 to 0.5 microg L(-1) are analysed with quantitative recoveries and similar efficiencies being achieved. After establishing the best conditions, we applied the method to the analysis of spiked natural waters.