Extending the lifetime of the running electrolyte in capillary electrophoresis by using additional compartments for...

The use of two additional reservoirs to accommodate the electrodes of the power source is proposed to improve the stability of the running electrolyte in capillary electrophoresis. The basic idea is to use salt bridges to connect those reservoirs to the ones containing the capillary ends. Although simple, there are several issues that can be considered in the design and implementation of such system in order to prevent undesired transference of material between the electrolysis and the main reservoirs. The use of a sealed electrolysis reservoir without a gas phase, the use of materials that ensure volume stability, and the use of bridges as long as possible are three basic directions. A compromise is involved in the dimensions of the sectional area of the bridge, because a small area diminishes the amount of a species transferred by diffusion but leads to an undesirable increase of the electrical field during the electrophoretic running. Thus, a bridge composed of a main wide-bore tube connected to a small-bore capillary seems to give the best performance for practical use. A simple electrolysis-separated system was adapted to a preexisting capillary electrophoresis system, and its performance was evaluated with a mixture of tartaric, malic, and succinic acids that was separated in sodium benzoate solution (pH 5.5) using the original equipment and the modified one. Due to the water electrolysis and the small buffering capacity of the electrolyte, there was a significant pH change and consequently changes in the effective mobilities of the analytes and loss of resolution after a few runs using the original equipment. Using the electrolysis-separated system, no significant change in the migration time and resolution was observed even after 15 runs. Besides the freedom to prepare running electrolytes with electroactive species or unbuffered solution, high throughput and the use of small reservoirs, such as the ones used in microfluidic devices, are the main advantages of the system.