Application of dispersion modeling to indoor gas release scenarios

Many complex models are available to study the dispersion of contaminants or ventilation effectiveness in indoor spaces. Because of the computationally complex numerical schemes employed, most of these models require mainframe computers or workstations. However, simple design tools or guidelines are needed, in addition to complicated models. A dispersion model based on the basic governing equations was developed and uses an analytical solution. Because the concentration is expressed by an analytical solution, the grid size and time steps are user definable. A computer program was used to obtain numerical results and to obtain release history from a thermodynamic source model. The model can be used to estimate three-dimensional spatial and temporal variations in concentrations resulting from transient gas releases in an enclosure. The model was used to study a gas release scenario from a pressurized cylinder into a large ventilated building, in this case, a transit parking and fueling facility.