Related Experiment Video
Updated: Aug 19, 2026

Dissolved Solute Sampling Across an Oxic-Anoxic Soil-Water Interface Using Microdialysis Profilers
Published on: March 24, 2023
New device and method for flux-proportional sampling of mobile solutes in soil and groundwater
Hubert De Jonge1, Gadi Rothenberg
1Danish Institute of Agricultural Sciences, Research Centre Foulum, DK-8830 Tjele, Denmark. Hubert@sorbisense.com
Abstract:
The importance of monitoring the transport of organic contaminants in soil and groundwater, and the pros and cons of existing sampling methods, are outlined. A new, alternative sampling method is proposed, using a passive sampler that functions as a water-permeable, semi-infinite sink for passing solutes of interest. Tracers integrated in the device store information on the volume of water passing through the sampler during the installation period. The conceptual basis of the sampling method is described. This device enables flux-proportional monitoring of the concentrations of mobile contaminants in the soil and groundwater. 14C-labeled phenanthrene (PHEN) and glyphosate (GLY) are used as case study compounds in laboratory experiments. The sorption capacities and uptake kinetics of 13 adsorbents are screened and compared, as well as the dissolution kinetics of three tracer salts: calcium citrate, calcium fluoride (CaF2), and calcium hydrogen phosphate (CaHPO4). The application of the passive sampler is then demonstrated in long-term laboratory experiments, using large soil columns under steady-state hydraulic conditions. The accumulated flux of PHEN was sampled with an accuracy of 3.6%-17.8%, using graphitized carbon, hexagonal mesoporous silica, and cross-linked polymers as adsorbents. The accumulated flux of GLY was sampled with an accuracy of 12.4%, using gamma-alumina as an adsorbent. The advantages and limitations of this new environmental monitoring method are discussed.
More Related Videos
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Gravimetry: Overview
In precipitation gravimetry, the analyte is converted into a precipitate and weighed. For example, the silver content in a sample can be estimated by precipitating and...

