Related Experiment Video
Updated: Aug 19, 2026

Manufacturing of Three-dimensionally Microstructured Nanocomposites through Microfluidic Infiltration
Published on: March 12, 2014
Manipulation of nanoneedle and nanosphere apatite/poly(acrylic acid) nanocomposites
Sz-Chian Liou1, San-Yuan Chen, Dean-Mo Liu
1Department of Materials Science and Engineering, National Chiao Tung University, 1001 Ta-hsueh Road, Hsinchu, Taiwan 300, Republic of China.
Abstract:
Colloidal apatitic nanosphere of 2-5 nm in diameter was synthesized in the presence of poly(acrylic acid), PAA. PAA, which has long been recognized as an inhibitor in the synthesis of hydroxyapatite, is used as a structure-directing agent for the synthesis of calcium-deficient apatite (CDHA) in this study. Experimental observation suggests a critical amount of the low-molecular-weight PAA, above which morphological evolution of CDHA nanoparticles from needle to sphere was observed. This reveals that the PAA acts as an inhibitor for the growth of CDHA crystals. Further incorporation of PAA of high molecular weight formed a highly optically transparent nanocomposite, even with the nanospherical apatite loading up to 35 wt %, suggesting no agglomeration. This was further justified through transmission electron microscopy (TEM), where the CDHA nanospheres were uniformly distributed in the PAA-CDHA nanocomposites. No interfacial crevices were visually observed, indicating a highly compatible interface between the inorganic CDHA and organic PAA phase.

