Related Experiment Video
Updated: Aug 11, 2026

A Coupled Experiment-finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials
Published on: May 18, 2015
Shiftwork and work injuries in an iron and steel mill
C N Ong1, W O Phoon, N Iskandar
1Department of Social Medicine and Public Health, National University of Singapore Lower Kent Ridge Road, Singapore 0511.
Abstract:
A study on work injuries that occurred over a five-year period was conducted in an iron and steel mill employing over 1000 workers. Of all the 921 injuries which required more than one day's sick leave, over 40% (383 cases) happened during the morning shift (0700-1500 hours), 210 cases occurred in the afternoon shift (1500-2300 hours) and only 150 cases were reported during the night shift. There were two injury peaks throughout the day, one at mid-morning (between 0900 and 1000 hours) and the other towards the mid-afternoon (1400-1500 hours). It was observed that hand injuries were more common during the morning and afternoon shifts and foot injuries normally occurred at night. 'Fall' was one of the main causes of accidents at night, whereas 'struck by' heavy objects and 'burn' were more common during the day. Although there were more accidents during the morning and afternoon shifts, work injuries which occurred at night generally required a longer duration of sick leave. This suggests that accidents which happened at night were more serious. It is believed that the work habits, shift systems and work environment have a substantial influence on these accidents.
Related Concept Videos
Fatigue
Residual Stresses
Steel Manufacturing
During this smelting process, limestone plays a crucial role by forming slag. Slag captures impurities within the molten iron, such...
Structural Steel Products
Once shaped, the steel's final form emerges as a continuous length, which is then segmented by a hot saw into manageable pieces. These segments are...
Steel Fastening Techniques
Rivets are cylindrical steel fasteners with a specially designed head. During application, rivets are heated until white-hot and then inserted through pre-drilled holes in the steel sections. A pneumatic hammer is used to shape the exposed end into a second head, securing the sections together.
Bolting is another...
Survey Safety

