A CFD study of the deep bed filtration mechanism for submicron/nano-particle suspension

The mechanism of the deep bed filtration for submicron and nano particles suspension was conducted by means of a force analysis on the suspended particles flow path through order-packed granular filter beds. The flow fields through the filter beds were calculated by using the commercial available CFD software--Fluent. Various types of granular packing structures, such as the simple cubic packing, body-centered packing and face-centered packing structures were chosen for analysis. The motion of suspended particle of 2.967, 0.816, 0.460 and 0.050 microm in diameter, respectively, were tracked by considering the following forces including a net gravitational force, hydraulic drag force, lift force, Brownian force, van der Waals force and a double layer force. The effects of the granular bed packing structure, the porosity of these beds and the suspended particle diameter on the capture efficiency of a granular filter bed were examined. The force analysis depicts that the inertial effect and van der Waals force increased the capture probability of particles on the granular filter bed while the lift force and the Brownian force decreased the particle deposition. Simulated results show that among the chosen packing structures, the face-center packed granular bed gives the greatest pressure drop and capture efficiency of particles due to the lower packing porosity. The simple cubic packed filter bed showed the lowest pressure drop and capture efficiency of particles due to the greatest packing porosity among the chosen packing structures. It is mainly due to the simple cubic packing structure in which there exists the free vertical downward flowing path and thus exhibits a higher packing porosity. The comparisons of the simulated capture efficiency with experimental results depicted that the body-centre packed granular bed showed the best approximation of capture efficiency compared to that of the randomly packed granular bed.