Related Experiment Video
Updated: Aug 19, 2026
Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions
Published on: April 19, 2018
Rheological characterization of Microcrystalline Cellulose/Sodiumcarboxymethyl cellulose hydrogels using a controlled
Varma S Rudraraju1, Christy M Wyandt
1Hoffmann-La Roche Inc., 340 Kingsland Street, Bldg 59, Rm. 207, Nutley, NJ 07110, USA. varmasr@matrixlabsindia.com
Abstract:
Rheological properties of two different commercial grades of Microcrystalline Cellulose/Sodiumcarboxymethyl Cellulose (MCC/NaCMC) hydrogels were investigated. A controlled stress rheometer fitted with parallel plate geometry was used. Application of the Cross Model relating the viscosity and shear rate data indicated the gels are extremely shear thinning. The two grades of Avicel (RC-591 and CL-611) made of varying MCC and NaCMC concentrations, exhibited distinguishable changes in yield stress and shear thinning behavior attributable to the individual composition. The hydrogels reached structural equilibrium in 1 week after manufacture. Lot to lot variability of Formula A hydrogels had minimal influence on the rheological properties of the resulting hydrogels. The yield stress and/or initial viscosity values observed were proportional to the concentration or phase volume of the MCC/NaCMC in water.
