Related Experiment Video
Updated: Aug 19, 2026
09:58
Light-driven Enzymatic Decarboxylation
Published on: May 22, 2016
[Determination of 3,5-di-t-butyltoluene by gas chromatography]
Se Pu = Chinese Journal of Chromatography
|January 1, 1997
Abstract:
A quantitative analytical method for 3,5-di-t-butyltoluene in reaction mixture by gas chromatography with methyl benzoate as internal standard is reported. A stainless steel column of 2m x 3mm i.d. packed with 15% FFAP/Chromosorb W/AW (60-80 mesh) and flame ionization detector were used with column temperature of 180 degrees C and injection port and detector temperatures of 250 degrees C. There was a good linear calibration curve in the range from 1.1 to 9.2 microg (r = 0.9990, n = 8). It was taken 10 minutes to complete an analysis.
Related Concept Videos
01:11Thin-Layer Chromatography (TLC): Overview
Thin-layer chromatography (TLC) is a chromatography technique that separates compounds based on their polarity. TLC typically uses polar silica gel, a form of silicon dioxide, as the stationary phase. The silica gel contains hydroxyl (OH) groups on its surface, which form hydrogen bonds with polar compounds, influencing their adhesion to the stationary phase.
To begin the analysis, a mixture of compounds is spotted on the starting line on the TLC plate using a thin capillary. The bottom of the...
To begin the analysis, a mixture of compounds is spotted on the starting line on the TLC plate using a thin capillary. The bottom of the...
01:13Gas Chromatography: Introduction
Gas chromatography (GC) is a technique for separating and analyzing volatile compounds in a sample. Its primary purpose is to identify and quantify components in complex mixtures, making it essential in fields such as environmental analysis, pharmaceuticals, and petrochemicals. GC is also called vapor-phase chromatography (VPC) or gas-liquid partition chromatography (GLPC).
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
01:21Gas Chromatography: Types of Detectors-I
There are different types of detectors used in gas chromatography, each with its own specific properties that make it suitable for detecting certain types of analytes. The most commonly used detectors in GC are thermal conductivity detector (TCD), flame ionization detector (FID), and electron capture detector (ECD).
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...