Numerical model for biological fluidized-bed reactor treatment of perchlorate contaminated groundwater

Biological fluidized-bed reactor (BFBR) treatment with 1.3 mm granular activated carbon as support medium is being used for removal of 2.6 mg/L perchlorate from contaminated groundwater in California. The California drinking-water action level of 4 microg/L for perchlorate requires 99.9% perchlorate removal. Sufficient ethanol, the electron donor, is added to remove oxygen and nitrate as well as perchlorate, as all three serve as electron acceptors, but with biological preference for oxygen and nitrate. A numerical BFBR model based upon basic physical, chemical, and biological processes including reaction stoichiometry, biofilm kinetics, and sequential electron acceptor usage was developed and evaluated with the full-scale treatment results. A key fitting parameter was bacterial detachment rate, which impacts reaction stoichiometry. For best model fit this was found to vary between 0.062 and 0.31 d(-1), with an average of 0.22 d(-1). The model indicates that GAC particle size, reactor diameter, and perchlorate concentration affect BFBR performance. While empty-bed detention time might be decreased somewhat below 10 min by an increase in either GAC particle size or reactor diameter, the current design provides a good factor of safety in operation. With a 10 min detention time, the effluent goal of 4 microg/L should be achievable even with influent perchlorate concentration as high as 10 mg/L.