Related Experiment Video
Updated: Aug 19, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Characteristics of sludge developed under different loading conditions during UASB reactor start-up and granulation
M M Ghangrekar1, S R Asolekar, S G Joshi
1Department of Civil Engineering, Indian Institute of Technology, Kharagpur-721 302, India. m_ghangrekar@rediffmail.com
Abstract:
Sludge characteristics available inside the reactor are of vital importance to maximize advantages of UASB reactor. The organic loading rate and sludge loading rate applied during start-up are among the important parameters to govern the sludge characteristics. Effects of these loading rates on the characteristics of the sludge developed are evaluated in six laboratory scale UASB reactors. The sludge characteristics considered are VSS/SS ratio of the sludge, sludge volume index, specific gravity, settling velocity and metal contents of the sludge developed under different loading rates. The experimental results indicate that, for developing good characteristics sludge, during primary start-up from flocculent inoculum sludge, organic loading rate and sludge loading rate should be in the range of 2.0-4.5 kg COD/m3 d and 0.1-0.25 kg COD/kg VSS d, respectively (chemical oxygen demand, COD). Proper sludge granulation and higher COD removal efficiency will be achieved by these loading rates.
Related Concept Videos
Scale-Up Processes
Biological Treatment of Effluent and Waste Water
Bioreactor Controls-II

