In-situ partitioning of butyltin compounds in estuarine sediments

The in-situ solid/pore-water partitioning of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) was determined for an estuarine sediment profile collected from a commercial marina. Total butyltin levels exceeded sediment quality guideline values, and were 220-8750 microg/kg for TBT, 150-5450 microg/kg for DBT and 130-4250 microg/kg for MBT. Pore-water butyltin concentrations ranged from 0.05 to 2.35 microg/l for TBT, 0.07-3.25 microg/l for DBT, and 0.05-0.53 microg/l for MBT. The partitioning of butyltin compounds between the sediment solid-phase and pore-water was described by an organic carbon normalised distribution ratio (D(OC)). The observed D(OC) values were similar for TBT, DBT and MBT, and were 10(5)-10(6) l/kg. Values for the Butyltin Degradation Index (BDI) were larger than 1 at depths greater than 10 cm below the sediment/water-column interface. This indicates that substantial TBT degradation has occurred in the sediments, and suggests that natural attenuation may be a viable sediment remediation strategy.