Related Experiment Video
Updated: Aug 18, 2026
Surgical Bone Implantation Technique for Rat Tibia Models of Diabetes and Osteoporosis
Published on: July 5, 2024
Accuracy study of computer-assisted drilling: the effect of bone density, drill bit characteristics, and use of a
T Hüfner1, J Geerling, G Oldag
1Trauma Department, Hannover Medical School, Hannover, Germany. huefner.tobias@mh-hannover.de
Objective:
This study was designed to determine the clinical relevant accuracy of CT-based navigation for drilling.
Design:
Experimental model.
Setting:
Laboratory.
Methods:
Twelve drills of varying lengths and diameters were tested with 2 different set-ups. Group 1 used free-hand navigated drilling technique with foam blocks equipped with titanium target points. Group 2 (control) used a newly developed 3-dimensional measurement device equipped with titanium target points with a fixed entry for the navigated drill to minimize bending forces. One examiner performed 690 navigated drillings using solely the monitor screen for control in both groups. The difference between the planned and the actual starting and target point (up to 150 mm distance) was measured (mm).
Statistics:
Levene test and a nonpaired t test. Significance level was set as P < 0.05.
Results:
The core accuracy of the navigation system measured with the 3-dimensional device was 0.5 mm. The mean distance from planned to actual entry points in group 1 was 1.3 (range, 0.6-3.4 mm). The mean distance between planned and actual target point was 3.4 (range, 1.7-5.8 mm). Free-hand navigated drilling showed an increased difference with increased length of the drill bits as well as with increased drilling channel for drill bits 2.5 and 3.2 mm and not for 3.5 and 4.5 mm (P < 0.05).
Conclusions:
The core accuracy of the navigation system is high. Compared with the navigated free-hand technique, the results suggest that drill bit deflection interferes directly with the precision. The precision is decreased when using small diameter and longer drill bits.
