Heavy metal binding capacity (HMBC) of municipal solid waste landfill leachates

This research describes the use of a toxicity assay for the identification of metal toxicity, bioavailability and heavy metal binding capacity (HMBC) of municipal solid waste (MSW) landfill leachates. MetPLATE, an assay specific for heavy metal toxicity, was used to determine the HMBC of MSW leachates collected from 14 sites in Florida, with a wide range of chemical and physical characteristics. The leachates displayed a low toxicity which was attributed to the site-specific parameters, including, high concentrations of both organic and inorganic ligands. The HMBC test was undertaken to measure the effect of these site-specific parameters on metal toxicity. The potential for MSW leachate to bind and, thus, detoxify heavy metals was investigated with copper, zinc, and mercury. The HMBC values obtained ranged from 3 to 115, 5 to 93 and 4 to 101 for HMBC-Cu+2, HMBC-Zn+2, and HMBC-Hg+2, respectively. Additionally, the high strength leachates displayed the highest binding capacities, although the landfills sampled represented a wide range of characteristics. For comparison, the HMBC values reported with local lake water, Lake Alice and Lake Beverly, and a wastewater treatment plant effluent were all below 3. A partial fractionation of MSW leachate samples from sites 1, 5 and 8, was conducted to further investigate the influence of selected site-specific physico-chemical parameters on metal binding. The fractionation revealed that the HMBC of the leachate samples was heavily influenced by the concentration of solids, organics and hardness.