Synthesis of zirconocene-based silica phases and evaluation in lindane and heptachlor epoxide adsorption/desorption

Silica (350 m(2) g(-1)) was chemically modified with Cp2ZrCl2 and (nBuCp)2ZrCl2 by grafting. Hybrid silica bearing surface indene groups was synthesized by the sol-gel method, followed by metallation with ZrCl(4)2THF. The resulting phases were characterized by Rutherford backscattering spectrometry (RBS), 13C and 29Si magic angle spin nuclear magnetic resonance, X-ray photoelectron spectroscopy, and diffuse reflectance infrared Fourier transform spectroscopy. According to RBS measurements, metal content was 0.2- to 0.3-wt% Zr/SiO2 for the grafted systems and 4.5-wt% Zr/SiO2 for the phase prepared by the sol-gel method. The solid phases were evaluated for the adsorption/preconcentration of lindane and heptachlor epoxide from aqueous solution. For comparative reasons, the commercial LC-18 phase was also evaluated. Analyte concentration was monitored by gas chromatography electron capture detection. For the grafted phases, the coordination sphere around the metal center seems not to influence the adsorption/desorption properties of these phases vis-a-vis the studied analytes. In the case of the phases prepared by the sol-gel method, recovery results were comparable to those observed for LC-18. Experiments using ZrO2 and ZrO2/SiO2 phases led to lower recovery results.