Effect of filler loading on resin cement bonding to silanized buildup composites

To determine the effects of silanation for core buildup composites on bond strength of resin cement.

Three core buildup composites including FluoroCore LV, Core Restore, and Clearfil Photo Core, of which filler loadings were 65 wt%, 74 wt%, and 83 wt% respectively, were used. All composite specimens were randomly divided into four surface treatment groups of eight each as following; 1) 600-grit ground only, 2) 600-grit ground plus silanation, 3) 600-grit ground plus air-particle abrasion, 4) air-particle abrasion plus silanation. Following these treatments, 4-META/MMA-TBB resin (C&B Metabond) was bonded to the specimen surfaces. Completed specimens were stored in 37 degree C water for 24 hours, and then thermocycled 20,000 times (4 degree C - 60 degree C) before shear bond strengths were tested. Data were analyzed by two-way ANOVA and Scheffé's test for statistical significance (P < 0.05).

Clearfil Photo Core, of which filler loading was the highest among the resin composites tested, treated with air-particle abrasion plus silanation obtained the highest bond strength. However, silanation alone was not effective for improving the bond strength.