Development of a 3-D, multi-nuclear continuous wave NMR imaging system

The development of a 3-D, multi-nuclear continuous wave NMR imaging (CW-NMRI) system is described and its imaging capability is demonstrated on a range of materials exhibiting extremely short T(2) relaxation values. A variety of radiofrequency resonators were constructed and incorporated into a new gradient and field offset coil assembly, while the overall system design was modified to minimise microphonic noise which was present in an earlier prototype system. The chemically combined (27)Al in a high temperature refractory cement was imaged, and the CW-NMRI system was found to be sensitive to small differences in (27)Al content in these samples. The penetration of (23)Na in salt water into samples of ordinary Portland cement (OPC) was investigated, with enhanced uptake observed for samples with larger pore size distributions. The solid (13)C component in a carbonated cement sample was also imaged, as were the (7)Li nuclei in a sample of powdered Li(2)CO(3). A spatial resolution of 1mm was measured in an image of a rigid polymeric material exhibiting a principal T( *)(2) value of 16.3 micros. Finally, a high-resolution 3-D image of this rigid polymer is presented.