Short-term batch studies on biological removal of chromium from synthetic wastewater using activated sludge biomass

Biological treatment of Cr(VI)-containing wastewater has drawn much attention recently as a method to treat environmental Cr(VI) contamination. The activated sludge method, due to its convenient operation and easy-to-scale-up, has been widely applied to treat municipal wastewater and some industrial wastewaters. In order to develop a suitable technique using activated sludge as the biomass to continuously remove Cr(VI) from wastewater, this paper investigated in short-term batch experiments the environmental elements affecting chromium biological removal from synthetic wastewater. The dissolved oxygen (DO), Cr(VI) initial concentration, biomass density, temperature, glucose content in the influent and contact time were observed to strongly influence chromium removal. It was found that the chromium removal efficiency decreased with the increase of DO and Cr(VI) initial concentration as well as glucose content in the feed, but increases in temperature and contact time improved the chromium removal efficiency. Although raising biomass concentration resulted in an increased chromium removal efficiency under both anaerobic and aerobic conditions, its influence on specific chromium removal was not significant.