Related Experiment Video
Updated: Aug 16, 2026

Experimental Column Setup for Studying Anaerobic Biogeochemical Interactions Between Iron (Oxy)Hydroxides, Trace Elements, and Bacteria
Published on: December 19, 2017
Effect of humic acids on heavy metal removal by zero-valent iron in batch and continuous flow column systems
Jan Dries1, Leen Bastiaens, Dirk Springael
1Department of Environmental and Process Technology, Flemish Institute for Technological Research (Vito), Boeretang 200, 2400 Mol, Belgium.
Abstract:
The effects of Aldrich humic acids (HA) on the removal of Zero-valent iron (ZVI) was investigated in laboratory systems. In batch, the removal rate of Zn and Ni (5 mg l(-1)) was, respectively, 2.8 and 2.4 times lower in the presence of HA (20 mg l(-1)) than in the absence of HA, presumably due to the formation of HA-heavy metal complexes which prevented the removal reactions at the ZVI surface. Chromate removal was not affected. In a column test, two parallel systems were supplemented with a continuous input of simulated groundwater containing a mixture of the heavy metals Zn, Ni and Cr(VI) (5 mg l(-1) each), with or without HA (at 20 mg l(-1)). Initially, the two column systems efficiently (>90%) removed the heavy metals from the simulated groundwater. When the input heavy metal concentration was increased to 8-10 mg l(-1), a significant breakthrough of Ni and Zn, up to 80%, occurred in the column system fed with HA. Chromate and HA did not significantly break through. After 60 weeks, the effect of HA on leaching of the accumulated metals (approx. 2 mg g(-1)) was investigated. No significant leaching was observed. The results of this study suggest that the impact of dissolved organic matter on the efficiency and lifetime of a ZVI barrier for in situ removal of heavy metals should be considered in the design of the barrier.
Related Concept Videos
Extraction: Advanced Methods
Microbial Leaching
Coagulation
Precipitation and Co-precipitation
Microbial Bioremediation of Uranium
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...

