Extraction and determination of sulfonamides, macrolides, and trimethoprim in sewage sludge

Pressurized liquid extraction (PLE) was optimized and validated for the determination of sulfonamide and macrolide antimicrobials and trimethoprim in sewage sludge samples. A mixture of water/methanol (50:50, v/v) was found as the most efficient extraction solvent. A temperature of 100 degrees C and a pressure of 100 bar were chosen for extraction. Two cycles of 5 min each efficiently extracted at least 97% of the total extractable amount of all studied analytes from activated sludge. The limits of quantification (S/N= 10) varied between 3 and 41 microg/kg dry weight (dw) and the relative recoveries ranged between 78 and 142%. Additionally, the influence of pH and different LC/MS/MS systems on the absolute recoveries was assessed. Of the investigated antimicrobials sulfapyridin, sulfamethoxazole, trimethoprim, azithromycin, clarithromycin and roxithromycin were detected in municipal sewage sludge samples. Concentrations in activated sludge ranged up to 197 microg/kgdw. In comparison, results obtained by ultrasonic solvent extraction were significantly lower for sulfonamides and in tendency lower for macrolides.