Separation of copolymers using high-performance liquid chromatography with polymeric stationary phase and liquefied
Makoto Takahashi1, Kumiko Shimoyama, Chizu Kyotani
1Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, Japan.
Abstract:
Chromatographic separation of copolymers depending on the chemical composition was studied by a solvent gradient method using liquefied carbon dioxide (CO2) as an adsorption promoting solvent. As the high polar stationary phase, non-bonded silica gel, crosslinked acrylamide (AA) gel and crosslinked acrylonitrile (AN) gel were utilized. All columns showed the typical normal phase type of adsorption. Polymeric stationary phases showed the higher sample recovery for styrene-methyl methacrylate (St-MMAs) copolymers, indicating suitability for quantitative analyses. The separations of butyl methacrylate (BMA)-methyl methacrylate, and 2,2,3,3,4,4,4-heptafluorobutyl methacrylate (FBMA)-methy methacrylate copolymers were also carried out, and the latter copolymers were separated based on the CO2-philicity with acrylonitrile column.
Related Concept Videos
High-Performance Liquid Chromatography: Introduction
In HPLC, two phases play a critical role in the separation process:
High-Performance Liquid Chromatography: Elution Process
Chromatography: Introduction
The phase in which the compounds linger or on which the compounds adsorb is called the stationary phase, whereas the mobile phase is the solvent that carries the solutes to be analyzed. In traditional column chromatography, the mixture flows through the stationary phase, and the compounds partition between the stationary and mobile phases...
Ion-Exchange Chromatography
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
High-Performance Liquid Chromatography: Instrumentation

