Characterizing the conversion kinetics of carbamazepine polymorphs to the dihydrate in aqueous suspension using Raman...

In an aqueous environment, polymorphic forms I-III of carbamazepine all convert to the dihydrate. This study investigated the conversion of each polymorphic form individually and of a mixture of forms III and I to the dihydrate. Two batches of form I with different crystal morphology were used. Samples were dispersed independently in water at 23+/-1 degrees C and recovered at various timepoints varying from 10 to 210 min. Scanning electron microscopy, X-ray powder diffraction and Raman spectroscopy were used to characterize the initial polymorphic forms and the recovered samples after 210 min. Raman spectroscopy combined with partial least squares analysis was used to generate quantitative models of binary and ternary mixtures of the different polymorphic forms with the dihydrate. On the basis of these models the conversion kinetics of the polymorphic forms I-III were characterized. First-order kinetics with an unconverted portion were used to model the data (R2> or =0.95). The unconverted portions ranged from 16 to 51% after dispersion for 210 min. The conversion kinetics were similar between polymorphic forms with comparable crystal morphology, but differed significantly between batches of the same polymorph (form I) with different crystal morphology. Furthermore, the conversion of forms III and I in the aqueous suspension was not influenced by the presence of the other polymorph when dispersed together.