Fixation of tendon grafts for collateral ligament reconstructions: a cadaveric biomechanical study

To compare the biomechanical properties of 4 methods of fixation of tendon grafts to bone as used for ligament reconstructions.

Thirty-two metacarpals were harvested from fresh-frozen cadavers and stripped of soft tissue. Flexor tendons were harvested from the same cadavers and cut into 2-mm-wide strips. Each tendon was fixed to a metacarpal head at the site of origin of a collateral ligament. Four different methods of fixation were tested. In group 1 the tendon was fixed to the bone with a 4.0-mm Arthrex bio-tenodesis interference screw (Arthrex, Inc., Naples, FL). In group 2 the tendon was passed through a bone tunnel and fixed with a 3.2-mm mini-Acutrak screw (Acumed, LLC, Hillsboro, OR) that was inserted in interference mode. In group 3 the tendon was passed through a bone tunnel and fixed with sutures tied over a polyethylene button. In group 4 the tendon was fixed with a mini-Mitek bone suture anchor (Mitek Worldwide, Norwood, MA). All specimens were clamped into a linear loading machine and loaded until failure. Statistical analysis was performed by 1-way analysis of variance testing.

The differences in maximal tensile strength and stiffness were statistically significant when comparing any 2 groups. The Arthrex biotenodesis interference screw was the strongest and stiffest fixation method, followed by the Acutrak screw inserted in interference mode. Next was the suture tied over a button method. The mini-Mitek bone suture anchor was the weakest.

Interference screw fixation of tendons to bone has statistically significant higher pullout strength and stiffness than 2 other commonly used fixation methods. The use of interference screws for fixation of tendon grafts to bone for hand ligament reconstructions is a promising new surgical technique.