Related Experiment Video
Updated: Aug 11, 2026

A Toolkit to Enable Hydrocarbon Conversion in Aqueous Environments
Published on: October 2, 2012
On-site production of hydrogen from mineral waste oils by thermocatalytic decomposition: an Aragon case study
María J Lázaro1, Isabel Suelves, Rafael Moliner
1Instituto de Carboquímica CSIC, Miguel Luesma Castán, 4, 50.015-Zaragoza, Spain.
Abstract:
On-site production of hydrogen and carbon nanofibers by thermocatalytic decomposition (TCD) of mineral oil waste (MWO) is analyzed. An experimental study carried out at lab scale to estimate the yields that can be expected from TCD of the MWO collected in the Aragon area is presented. Based on these results, mass and energy balance have been carried out to have a preliminary estimation on the products that could be obtained by processing the 10 000 tonnes/year of MWO that can be collected in the Aragon region. The process would consist of four steps: (1) drying, (2) vaporization, (3) primary decomposition, and (4) catalytic decomposition. After drying and vaporization, MWO is converted in step 3 into fuel grade carbon and a gas mixture that mainly contains hydrogen and methane. Methane is partially converted in step 4 into hydrogen and a carbon material that contains carbon nanofibers which could be used to manufacture utilities with high added value. The 10 000 tonnes/year of MWO would yield 705 t/y of H2, 4962 t/y of fuel grade carbon, and 1016 t/y of pure carbon. The mixture obtained (71% H2: 23% CH4) could be used as a hydrogen source to obtain pure hydrogen or hydrogen-natural gas mixtures to fuel a captive fleet of public urban vehicles powered by fuel cells or dedicated ICE, respectively.
More Related Videos
Related Concept Videos
Bioremediation
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the surface of...
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Microbial Bioremediation of Hydrocarbons
Production of Organic Acids

