Changes of the porous structure of activated carbons applied in a filter bed pilot operation

The paper investigates the changes in porosity (i.e., in the accessible adsorption capacity of carbonaceous adsorbents for pollutants during filter bed maturation) of three activated carbons applied in a filter bed pilot operation. The results of this investigation may help to reduce operating costs, increase granular activated carbon bed life, maximize the useful life of biofilters, and understand the mechanism of water purification by carbon adsorbents. The analysis of the pore structure was limited to the first year of service of the beds, since this was when the largest decrease in the available pore capacity occurred. Low-temperature nitrogen adsorption isotherms were used to evaluate the structural parameters and pore size distributions (PSDs) of carbon samples (virgin (reference) and mature adsorbents for different periods of water treatment) on the basis of the Nguyen and Do (ND) method and density functional theory (DFT). These results were compared with small-angle X-ray scattering (SAXS) investigations (PSDs calculated by Glatter's indirect transformation method (ITP)). The results show that in general, the ND and ITP methods lead to almost the same qualitative distribution curve behavior. Moreover, the enthalpy of immersion in water, mercury porosimetry, densities (true and apparent), and the analysis of ash are reported and compared to explain the decrease in adsorptive capacity of the carbons investigated. On the other hand, the efficacy of TOC (total organic carbon, i.e., a quantity describing the complex matrix of organic material present in natural waters) removal and the bacteria count were analyzed to explain the role of adsorption in the elimination of contaminants from water. Finally, a mechanism of organic matter removal was suggested on the basis of the above-mentioned experimental data and compared with mechanisms reported by other authors.