Related Experiment Video
Updated: Aug 15, 2026

Construction of a Low-cost Mobile Incubator for Field and Laboratory Use
Published on: March 19, 2019
Microbiological quality of carbonated drinking water produced with in-home carbonation systems
Wolfgang Kohnen1, Susanne Teske-Keiser, Heinz-Georg Meyer
1Department of Hygiene and Environmental Medicine, Johannes Gutenberg-University, Mainz, Germany. kohnen@mail.uni-mainz.de
Abstract:
The microbiological quality of carbonated water produced with tap water in commercial in-home carbonation systems was determined, the results being discussed in the context of the microbiological quality of the tap water used, the properties of the drink makers, and the procedures of preparation and washing of various parts of the appliance. The last-mentioned data were received from each participant of the study by questionnaire. Escherichia coli, coliforms, fecal streptococci and spore-forming sulphite-reducing anaerobes were used as indicators for the hygienic quality of the water. Tap-water samples were collected according to the usual procedure when filling the carbonating bottle, i.e., without previous flushing and disinfection of the faucet. In 12% of tap-water samples, coliforms could be detected. On the other hand, in 20 of 52 carbonated waters (39%), coliforms as indicators of water pollution were found. By means of fecal streptococci and Pseudomonas aeruginosa, it was possible to establish additional contamination not involving E. coli or coliforms alone. Analysis revealed that, in addition to contaminated tap water, a bacterial biofilm on the inner surface of the re-usable bottles had a predominant influence on the microbiological quality of the carbonated water.
Related Concept Videos
Microbes in Beverage Production
Carbonation Shrinkage
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction facilitates the...
Quality of Water
Turbulent Flow: Problem Solving
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures enhance...
Microbes in Food Production
Bioreactor Controls-I

