Related Experiment Video
Updated: Jun 22, 2026

Experiments on Ultrasonic Lubrication Using a Piezoelectrically-assisted Tribometer and Optical Profilometer
Published on: September 28, 2015
Resonant vibration investigations for piezoceramic disks and annuli by using the equivalent constant method
1Department of Mechanical Engineering, Ching Yun University, Chung-Li, Taiwan. chhuang@cyu.edu.tw
Abstract:
This paper presents the equivalent constant method to investigate the transverse vibration of piezoceramic disks and annuli. By comparing the characteristic equations of resonant frequencies between isotropic and piezoceramic disks, the named equivalent Poisson's ratio v is derived, then the transverse vibration characteristic equation can be expressed as a single formulation for these two materials. To verify this method, characteristic equations of transverse vibration for piezoceramic disks and annuli with many different boundary conditions are discussed and calculated for resonant frequencies. Numerical calculations based on the finite-element method (FEM) also are performed, and the results agree rather well with the theoretical predictions. With the aid of the relations between frequency parameter and equivalent Poisson's ratio in explicit form, the other application of equivalent Poisson's ratio is the inverse evaluation of material constants. The laser Doppler vibrometer (LDV) and impedance analyzer are used to experimentally obtain the resonant frequencies of transverse and radial extensional vibrations, respectively. By the experimental results for the traction-free piezoceramic disk, the planar Poisson's ratio v(p) and planar electromechanical coupling coefficient k(p) are determined.
More Related Videos
07:44Characterization of Full Set Material Constants and Their Temperature Dependence for Piezoelectric Materials Using Resonant Ultrasound Spectroscopy
Published on: April 27, 2016
10:39Fabrication and Characterization of Thickness Mode Piezoelectric Devices for Atomization and Acoustofluidics
Published on: August 5, 2020