Related Experiment Video
Updated: Aug 14, 2026

Real-time Monitoring of Reactions Performed Using Continuous-flow Processing: The Preparation of 3-Acetylcoumarin as an Example
Published on: November 18, 2015
In-line monitoring of partial and overall solid concentration during solvent-mediated phase transition using Raman
1Laboratoire d'Automatique et de Génie des Procédés UMR CNRS 5007, Université Claude Bernard Lyon 1, F-69622 Villeurbanne Cedex, France.
Abstract:
A calibration strategy for the continuous monitoring of solvent-mediated phase transition was developed using in situ Raman spectroscopy. Citric acid which exhibits enantiotropy during its anhydrous/monohydrate phase transition was selected as a model organic product. Using 25 samples in suspension, specific calibration of the spectral data was obtained for estimating in-line both the overall solid concentration in suspension and the composition of the solid phase. In addition to such key-measurements, reliable estimates of supersaturation were computed in-line from the mass balance of the solute. In order to validate the technique, anhydrous to monohydrate phase transition experiments were performed in suspensions at 15 degrees C and the kinetic process involved was monitored. Despite the use of various solid concentrations and reactor configurations, both the reproducibility and the reliability of the in situ Raman measurements are shown to be satisfactory.
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and the...
Chemical Shift: Internal References and Solvent Effects
The internal reference compound generally used in NMR spectroscopy is tetramethylsilane (TMS). TMS is preferred because it is chemically inert, soluble in NMR solvents, and easily removable. Also, the highly shielded methyl protons in TMS yield an intense...

