Screening of new sorbent materials for cadmium removal from aqueous solutions
1Laboratory of Sorbent Materials and Water Treatment, Department of Chemistry, Faculty of Sciences, University of Tlemcen, Algeria. ho_benaissa@yahoo.fr
Abstract:
This study compares the abilities of four low-cost materials: peels of peas, broad bean, and medlar, respectively and fig leaves, to remove cadmium from aqueous solutions. Kinetic data and equilibrium sorption isotherms were measured in batch conditions. Kinetics of cadmium sorption was contact time, initial cadmium concentration and sorbent type dependent. The results also showed that the kinetics of cadmium sorption were described by a pseudo second-order rate model. The cadmium uptake of these low-cost materials was quantitatively evaluated using sorption isotherms. Results indicated that Langmuir model gave an acceptable fit to the experimental data. A high cadmium sorption was observed by these materials. The broad bean peel was the most effective to remove cadmium ions with a maximum sorption capacity about 147.71 mg/g followed by peas peel (118.91 mg/g), fig leaves (103.09 mg/g), and medlar peel (98.14 mg/g).
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...


