Hydraulic characterization for steam enhanced remediation conducted in fractured rock

To explore the viability of Steam Enhanced Remediation (SER) in fractured rock a small-scale steam injection and water/vapour extraction pilot study was conducted at the former Loring Air Force Base in northern Maine, USA. A detailed well testing program was undertaken to assist in the design of the injection and extraction well array, and to assess the possibility of off-site heat and contaminant migration. A structurally complex limestone having low matrix porosity and a sparse distribution of fractures underlies the study site. To characterize the groundwater and steam flow pathways, single-well slug tests and more than 100 pulse interference tests were conducted. The results of the well testing indicate that the study site is dominated by steeply dipping bedding plane fractures that are interconnected only between some wells in the injection/extraction array. The SER system was designed to take advantage of interconnected fractures located at depth in the eastern end of the site. An array of 29 wells located in an area of 60 by 40 m was used for steam injection and water/vapour extraction. The migration of heat was monitored in several wells using thermistor arrays having a 1.5 m vertical spacing. Temperature measurements obtained during and after the 3 month steam injection period showed that heat migration generally occurred along those fracture features identified by the pulse interference testing. Based on these results, it is concluded that the pulse interference tests were valuable in assisting with the design of the injection/extraction well geometry and in predicting the migration pathways of the hot water associated with the steam injection. The pulse interference test method should also prove useful in support of any other remedial method dependant on the fracture network for delivery of remedial fluid or extraction of contaminants.