Characteristics of aerobic granular sludge in a sequencing batch reactor with variable aeration

Yong-Qiang Liu1, Joo-Hwa Tay, Benjamin Yan-Pui Moy

  • 1Environmental Engineering Research Centre, School of Civil and Environmental Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore. cyqliu@ntu.edu.sg

Related Concept Videos

Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...
Bioreactor Design and Operational System01:29

Bioreactor Design and Operational System

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
Batch vs Continuous Culture01:14

Batch vs Continuous Culture

Fermentation is a foundational biotechnological process used to produce pharmaceuticals, biofuels, enzymes, and food additives. Among industrial strategies, batch and continuous fermentation are the two most widely applied. Although both rely on microbial conversion of substrates into desired products, they differ markedly in operation, productivity, and suitability for specific applications.Batch fermentation occurs in a closed system in which nutrient media and inoculum are added at the...
Bioreactor Controls-I01:28

Bioreactor Controls-I

Maintaining optimal conditions within fermenters is essential for maximizing microbial productivity and ensuring process efficiency. This lesson focuses on key parameters—temperature, foam, pH, carbon dioxide, oxygen, and pressure—and their precise measurement and control strategies in fermentation systems.Temperature ControlTemperature regulation is critical due to the exothermic nature of many fermentation processes. In small laboratory fermenters, temperature is commonly monitored using...
Fed-Batch Culture01:23

Fed-Batch Culture

Fed-batch culture is a widely used bioprocessing strategy combining aspects of batch culture with controlled substrate feeding to optimize cell growth and product formation. In this semi-closed system, nutrients are strategically added during fermentation, while the accumulated products and biomass remain within the bioreactor until the end of the operation. This controlled addition of substrates allows for better management of growth kinetics, nutrient limitation, and metabolite...
Microbial Wastewater Treatment01:30

Microbial Wastewater Treatment

Microbial communities in aquatic ecosystems play a key role in the natural breakdown of contaminants introduced through domestic and industrial effluents. Acting as biological catalysts, these microbes change and mineralize a wide range of organic and inorganic pollutants under different redox conditions.In oxygen-rich surface waters, aerobic heterotrophs lead organic matter breakdown, using oxygen as the terminal electron acceptor to efficiently oxidize substrates to carbon dioxide and water.