Electrochemical determination of 6-mercaptopurine at silver microdisk electrodes

The electrochemical behaviour of 6-mercaptopurine (6-MP) at a microdisk electrode is investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results indicate that 6-MP can be strongly adsorbed on the surface of the static mercury drop electrode (SMDE) and reacts with Ag+ ions which are produced at positive potentials. 6-MP yields a well-defined cathodic stripping signal during the negative scan at about -0.812 V (vs. SCE) in pH 9.0 phosphate buffer solution. The electrode has hence been used for the determination of 6-MP by differential pulse voltammetry (DPV). The linear range is between 2.0x10(-7) and 5.0x10(-5) mol/l, with the calculated detection limit (S/N=3) of 8.0x10(-8) mol/l. The relative standard deviation is 3.0% for eight successive determinations of 4.0x10(-5) mol/l 6-MP. The determination of 6-MP in tablets has also been carried out and satisfactory results have been obtained.