3-D reconstruction of microcalcification clusters using stereo imaging: algorithm and mammographic unit calibration

The three-dimensional (3-D) shape of microcalcification clusters is an important indicator in early breast cancer detection. In fact, there is a relationship between the cluster topology and the type of lesion (malignant or benign). This paper presents a 3-D reconstruction method for such clusters using two 2-D views acquired during standard mammographic examinations. For this purpose, the mammographic unit was modeled using a camera with virtual optics. This model was used to calibrate the acquisition unit and then to reconstruct the clusters in the 3-D space after microcalcification segmentation and matching. The proposed model is hardware independent since it is suitable for digital mammographic units with different geometries and with various physical acquisition principles. Three-dimensional reconstruction results are presented here to prove the validity of the method. Tests were first performed using a phantom with a well-known geometry. The latter contained X-ray opaque glass balls representing microcalcifications. The positions of these balls were reconstructed with a 16.25-microm mean accuracy. This very high inherent algorithm accuracy is more than enough for a precise 3-D cluster representation. Further validation tests were carried out using a second phantom including a spherical cluster. This phantom was built with materials simulating the behavior of both mammary tissue and microcalcifications toward Xrays. The reconstructed shape was effectively spherical. Finally, reconstructions were carried out for real clusters and their results are also presented.